Telemetry Products

Non-powered GPS Asset Tracker 2

The GPS Tracker 2 is a state of the art, high precision tracking device designed to provide ultimate performance in asset connectivity and tracking. The device is hardwired into the vehicle for optimal output with the added security of a backup battery.

Enquire Now

Non-powered GPS Asset Tracker 2

GPS Asset Tracker 2 Hardware Features

  • High precision GPS: High precision GPS through combining GPS and GLONASS with a 72 channel high sensitivity receiver for enhanced accuracy and faster fixes.
  • Real-time tracking: Real-time tracking with the GPS Tracker 2 remaining continuously connected while on the move.
  • Bluetooth® 5.0 Gateway: Bluetooth® 5.0 Gateway for affordable tagged asset management and sensor monitoring applications.
  • Asset Tracking: Ability to track assets in rural and remote areas outside of cellular coverage.
  • Remote immobilisation: Remote immobilisation of vehicles in the case of theft or unauthorised usage.
  • Operator Safety: Monitor speed, aggressive acceleration, braking, cornering, idling, and more to improve safety and prevent unnecessary wear on vehicles.
  • Accident & Rollover Alerts: Ability to triggered notification alerts caused by extreme changes in velocity and orientation of vehicles.
  • Run Hour Monitoring: Monitor total run hours and distance travelled (odometer) to understand and optimise asset utilisation.

GPS Asset Tracker 2 Specifications

Connectivity

The GPS Tracker 2 is available in either 2G or LTE-M / NB-IoT.

  • 2G: SARA-G350-02S-01 850/900/1800/1900 MHz
  • LTE-M / NB-IoT: uBlox SARA-R410M Modem operates on all major global LTE-M and NB-IoT bands. Supported LTE bands: 1*, 2, 3, 4, 5, 8, 12, 13, * 18, 19, 20, 26*, 28 (*roaming bands)
  • Bluetooth® 5.0 Gateway: reports nearby Bluetooth® tags and sensors for affordable tagged asset management and sensor monitoring.
  • SIM Size & Access: Internal Micro 3FF SIM

Location

  • Module: uBlox EVA-M8
  • Constellation: Concurrent GPS / GLONASS
  • Channels: 72 Channel High Sensitivity Receiver
  • Tracking Sensitivity: -167dBm industry-leading tracking performance
  • GNSS Assistance: GNSS almanac data for greater sensitivity and position accuracy.
  • Low Noise Amplifier: GPS signals are boosted by a unique low-noise amplifier (LNA) allowing operation where other units fail.

Power

  • Input Voltage: 8-45V DC (max)
  • Self-Resetting Fuse: Built-in self-resetting fuse makes installation simple and safe. Stringent automotive power “load dump” tests are conducted to * ensure operation in the harshest electrical systems.
  • Operating Current: ~25/50mA when moving and ~150mA battery charging
  • Sleep Current: <2mA
  • Back-Up Battery: 1100mAh LiPo internal backup battery pack

Mechanics and Design

  • Dimensions: 125 × 65 × 30 mm (4.92 × 2.56 × 1.18″)
  • Weight: 250 g (8.82 oz)
  • Housing: ABS Polycarbonate Plastic
  • Installation: 24 Pin Connector provided as standard.
  • Operating Temperature: -20°C to +60°C (connected to external power). At < 0°C and > +40°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures.
  • GPS Antenna: Internal
  • Cellular Antenna: Internal
  • RF Antenna: Internal
  • 3-Axis Accelerometer: to detect movement, high G-force events, and more.
  • Diagnostic LED: signifies operation status.
  • Flash Memory: Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging.
  • Internal Buzzer: fitted for audible alerts for speeding, harsh driving, driver ID reminders, error conditions, input feedback, and other events.

Interfaces

  • Analog Inputs: 1 × 0-30V Analog Inputs. Auto Ranging, 12-bit ADC. 0-5V range: 1.22mV precision. 0-30V range: 7.32mV precision.
  • Digital Inputs: 6 x Digital Inputs with configurable pull-up/down. 0-48V DC input range. On/Off thresholds: Pull-up enabled: low at 0.8V, high at 1.0V, Pull-down enabled: low at 2.0V, high at 2.4V.
  • Digital Outputs: 2 x Switched Ground Digital Outputs. Easily wired up to switch external lights, relays, buzzers etc. Can be used to immobilize a vehicle.
  • Ignition: 1 x dedicated ignition digital input 0-48V DC. 5V on/off threshold.
  • RS-232: Can be used to connect Iridium Edge® Module or interface with controllers and other sensors.
  • Switched Power Out: Outputs are either 5V (external power connected) or Vbatt (no external power) Maximum current: 400mA. The G120 can provide power to external peripherals, eliminating the need for additional external power supplies.
  • TLL Interface: Serial interface used to connect a Digital Matter RFID reader for Driver ID.
  • Wiegand: The G120’s Wiegand Interface enables easy integration with a variety of RFID card types and readers. Existing employee access badges or IDs can be used with a Wiegand reader for driver ID, permission-based actions, and theft prevention, eliminating the hassle of issuing additional ID cards or fobs.
  • 1-Wire® or iButton®: 1-Wire® or “iButton®” can be used to read Driver ID tags. Readers available to suit multiple card formats.

Device Management

  • Flexible Configuration: Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application.
  • OEM Server: Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system.

Integration

  • Third-Party Integration: TCP Direct or HTTPS Webhook

Peripherals

  • RFID Driver ID Reader

Security

  • Military-level AES-256 Encryption from device to OEM Server to protect the integrity and confidentiality of telematics data.
  • Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

Warranty

  • Manufacturer’s Warranty: One year manufacturer’s warranty.

Enquire Today

Enquire Now

©2023 Speedshield Technologies

Contact us